DEPOT

Equipment Engineering Context

Connect equipment to its normal operating service, operating/design envelope, process media, typical materials, Engineering Components, advisory Engineering Rules, documents, and procurement compatibility checks without creating validation, calibration, QA, or maintenance workflows.

Architecture Assets6

Equipment records with structured engineering definitions.

Architecture

Engineering Assets30

Installed Engineering Assets define the physical component configuration on equipment without creating maintenance or inventory records.

Installed Reality

Engineering Documents38

Manuals, wiring diagrams, P&IDs, datasheets, and engineering notes linked through the Engineering Documents register.

Reference Library

Procurement Checks3

Open procurement entries carrying equipment engineering specifications.

Architecture

Service Contexts7

14 media, 7 materials, and 13 component links define operating context.

Operating Context

Service Profiles6

3 batch, 1 utility, and 14 component expectation links define operating envelopes.

Operating Envelope

Engineering Rules10

4 critical and 4 review-required guidance rules across 10 engineering categories.

Guidance Only

Engineering Compatibility2 Review

1 mismatches and 1 warnings before procurement approval.

Spec Review

SearchStatusUtility

Equipment Architecture Register

Authoritative engineering definition for electrical, controls, utilities, documents, and procurement rules.

Engineering Definition

Asset	Service Context	Electrical	Control	Utilities	Status	Procurement
CrystallizerProcess Equipment / Production Suite	Solvent Crystallization	400V Three Phase	Siemens S7-1200 CPU 1214C	Nitrogen, Vacuum, Cooling Water	Engineering Mismatch	2 Review
100kVA GeneratorPower Generation / Utilities Yard	Utility Power Feed	400V Three Phase	Deep Sea DSE7320 controller	Diesel, Battery DC	Architecture Valid	No Open Review
RO SystemWater Treatment / Utilities	Water Treatment Utility	230V Single Phase	Local RO controller	Water, Drain	Architecture Valid	No Open Review
Air CompressorCompressed Air / Utilities	Compressed Air	400V Three Phase	Compressor local controller	Compressed Air, Cooling Air	Architecture Valid	No Open Review
Nutsche Filter DryerProcess Equipment / Production Suite	Vacuum Filtration / Washing / WIP / CIP Exposure	400V Three Phase	Siemens S7-1200 CPU 1214C	Nitrogen, Vacuum, Compressed Air, WIP	Architecture Valid	No Open Review
Distillation UnitProcess Equipment / Production Suite	Distillation	400V Three Phase	Siemens S7-1200 CPU 1212C	Vacuum, Thermal Oil, Cooling Water	Architecture Valid	No Open Review

EQ-AIR-001

Air Compressor

Engineering model for service context, service profile, installed components, required specifications, procurement checks, and future Augustus monitoring.

HighArchitecture Valid

Service Context

Air CompressorCompressed Air

Compressed Air

No Product ContactNo Solvent ContactNo Vacuum Service

Primary FunctionGenerate and distribute compressed air to equipment and pneumatic control points.

Operating ModeContinuous utility generation

TemperatureAmbient utility service with compressor discharge temperature controlled by package design

Pressure6-8 bar typical local distribution range

VacuumNot applicable

Engineering ModelEquipment -> Service Context -> Media -> Components

Primary Process Media

Compressed Air

Typical Materials

EPDM PTFE 304 Stainless Steel

Engineering Components

Pressure Gauge 0-10 bar ABB ACS355 VFD 4 kW 3 kW Agitator Motor

Service Profile

ESP-AIR-COMPRESSED-AIRContinuous Operating Envelope

Compressed air utility profile for plant and instrument air generation, local pressure control, and compressor package electrical drive service.

Continuous

PurposeProvide reliable compressed air while preserving pressure range, filtration assumptions, motor/VFD duty, and instrument compatibility.

Normal TemperatureAmbient utility operation with compressor package discharge cooling

Normal Pressure6-8 bar local distribution range

Vacuum CapabilityNo vacuum service expected

Process Media

Compressed Air (Primary)

Materials

EPDM PTFE 304 Stainless Steel

Expected Components

Pressure Gauge 0-10 bar ABB ACS355 VFD 4 kW 3 kW Agitator Motor

Equipment

Engineering Evaluation

Air Compressor

Overall ResultPASSPass

Air Compressor aligns with current engineering expectations from its Service Profile, Service Context, Process Media, Materials, and Engineering Components.

Equipment ArchitectureAir Compressor Service ProfileCompressed air utility profile for plant and instrument air generation, local pressure control, and compressor package electrical drive service.Service ContextCompressed Air Engineering Assets1 installed assets

Required Competencies

Mechanical MaintenanceMechanical / Critical

RequiredCompetency

Rotating Equipment MaintenanceMechanical / Critical

SpecialistCompetency

Electrical IsolationElectrical / Safety Critical

RequiredCompetency

QMS-derived personnel status: Future. This section is informational only and does not change the Engineering Evaluation result.

Open 4 more Engineering Competencies

Supporting Findings

Service ProfilePass

Air Compressor has a captured Service Profile and operating envelope.

Air Compressor is evaluated through its Service Profile (Compressed air utility profile for plant and instrument air generation, local pressure control, and compressor package electrical drive service.) using normal media exposure, utilities, and component expectations rather than manufactured product name.

Process MediaPass

Primary Process Media: Compressed Air.

Process Media links give Depot the engineering service context used to reason about Materials of Construction and Engineering Components for Air Compressor.

Engineering ComponentsPass

3 expected Engineering Component links and 3 Materials Library links support this profile.

The Service Profile connects Equipment, Process Media, shared Materials Library records, and Engineering Component specifications so future rules can evaluate the approved engineering baseline.

Engineering Basis: Wetted product-contact components use approved Materials of Construction

Service ContextPass

Compressed Air defines the normal engineering service for this equipment.

Service Context defines the normal operating service, media contact, and component expectations for Air Compressor; Depot does not infer these expectations from a product batch name.

6 more supporting findings in the Evaluation tab.

This is an advisory engineering evaluation. Depot does not block procurement, create approvals, create QA work, create maintenance work, change inventory, or create validation, qualification, calibration, or change-control workflows from this panel.

Applicable Engineering Rules

Product-contact solvent-wetted gaskets should use PTFE or an approved FKM compound with supplier-grade documentation.Product-contact solvent gaskets use PTFE or approved FKM

MaterialsCriticalRule

Silicone is not generally preferred for routine heptane-wetted service; use PTFE or approved FKM unless engineering review says otherwise.Hydrocarbon solvent service avoids silicone gaskets

Process MediaReview RequiredRule

Vacuum-service equipment should use vacuum-rated gauges, assemblies, seals, and sight glasses for the defined design vacuum.Vacuum service uses vacuum-rated gauges

VacuumReview RequiredRule

Heated product-contact and thermal utility boundaries should use components rated for the Service Profile temperature envelope.High-temperature services require temperature-rated seals

TemperatureCriticalRule

Open 6 more Engineering Rules

Rules are advisory engineering knowledge for this phase. Depot is not automatically evaluating or blocking procurement from this panel.

Electrical

Supply400V Three Phase

Frequency50 Hz

Connected DBDB-UTIL-02

Breaker40A 3P MCCB

Cable Size10 mm2 4C+E

EarthingBonded to utility earth bar

Installed Component Checks

Area	Installed	Required	Status	Finding
Electrical	400V Three Phase	400V Three Phase	Pass	Installed supply must match the equipment engineering definition.
Breaker	40A 3P MCCB	40A minimum	Pass	Breaker rating is checked before replacement or installation work.
VFD	Schneider ATV320U75N4C 7.5 kW	7.5 kW / 15A minimum	Pass	Installed drive must satisfy the power and current engineering rule.

Engineering Components

Component	Class	Location	MoC	Health	Open
Bearing 6205-ZZ	Bearing	Motor NDE	Bearing Steel	Warehouse Stock Available	Component

Installed Engineering Assets

Engineering Asset	Component	Location	Manufacturer	Serial	Status
Air Compressor Motor NDE Bearing	EC-BEARING-6205-ZZ	Motor NDE	SKF	SKF-6205-88	Installed

These are installed physical component instances. Equipment remains the machine; Engineering Components remain the specification; Engineering Assets identify the installed configuration.

Typical Engineering Tools

Tool	Category	Availability	Storage	Open
Bearing Puller	Mechanical	Assigned	Workshop	Tooling
Clamp Meter	Electrical	Available	Electrical Workshop	Tooling
Insulation Resistance Tester	Electrical	Available	Electrical Workshop	Tooling
Phase Rotation Meter	Electrical	Assigned	Electrical Workshop	Tooling
Inspection Camera	Inspection	Available	Engineering Workshop	Tooling
Micrometer	Inspection	Available	QA Store	Tooling
Chain Block	Lifting	Available	Engineering Workshop	Tooling
Engine Hoist	Lifting	Available	Workshop	Tooling

Typical tools are informational engineering knowledge only. Depot does not reserve tools, schedule tool use, create maintenance work, or manage calibration from this panel.

Typical Competencies

Competency	Category	Requirement	Open
Mechanical Maintenance	Mechanical	Required	Competency
Rotating Equipment Maintenance	Mechanical	Specialist	Competency
Electrical Isolation	Electrical	Required	Competency
Lockout / Tagout	Process Safety	Required	Competency
Pressure System Awareness	Process Safety	Required	Competency
VFD / Motor Drive Awareness	Electrical	Specialist	Competency
Utility System Maintenance	Utilities	Required	Competency

Typical Competencies are engineering requirements for future work-order consumers. Depot does not assign people, check training records, or create QMS/LMS workflows from Equipment Architecture.

Motors and Drives

Component	Manufacturer	Model	Power	Current	Detail
Compressor Motor	Atlas Copco	GA7	7.5 kW	15.2A	1450 RPM
VFD	Schneider	ATV320U75N4C	7.5 kW	17A	400V; firmware 2.9

UPS and Controls

Installed UPSNo UPS installed

PLCCompressor local controller

HMILocal LCD

ProtocolsModbus TCP