Maps each spare to compatible equipment for standardization, commonality analysis, stocking optimization, and critical spare assessment.
This view starts from the spare and shows the equipment it supports.
| Spare Item | Used By | Used By Count | Available Stock | Standardization Signal | Confidence | Readiness Contribution |
|---|---|---|---|---|---|---|
| Bearing Set 6205 | Used By: 4 Assets - Extractor A, Extractor B, Vacuum Pump, Feed Pump | 4 Assets | 2 Sets | High Commonality Component | Validated | Full Compatibility |
| Mechanical Seal Kit MS-40 | Used By: 3 Assets - Extractor A, Extractor B, Feed Pump | 3 Assets | 1 Kits | Shared Spare | Validated | Full Compatibility |
| Service Gasket Kit | Used By: 3 Assets - Extractor A, Extractor B, Feed Pump | 3 Assets | 0 Kits | Shared Spare | High | Full Compatibility |
| Filter Bag FB-100 | Used By: 2 Assets - Extractor A, Extractor B | 2 Assets | 18 EA | Shared Spare | Validated | Full Compatibility |
| Compressor Service Kit CSK-01 | Used By: 2 Assets - Chiller 01, Chiller 02 | 2 Assets | 1 Kits | Shared Spare | Validated | Full Compatibility |
| Refrigerant Filter RF-20 | Used By: 2 Assets - Chiller 01, Chiller 02 | 2 Assets | 4 EA | Shared Spare | High | Full Compatibility |
| O-Ring Set OR-18 | Used By: 3 Assets - Chiller 01, Chiller 02, Air Compressor | 3 Assets | 5 Kits | Shared Spare | Medium | Mitigated Risk Only |
| Generator Service Kit GSK-100 | Used By: 1 Assets - Generator | 1 Assets | 2 Kits | Single-Asset Spare | Validated | Full Compatibility |
| Control Module CM-12 | Used By: 1 Assets - Generator | 1 Assets | 0 EA | Single-Asset Spare | Validated | Full Compatibility |
| Air Intake Filter AF-10 | Used By: 2 Assets - Generator, Air Compressor | 2 Assets | 4 EA | Shared Spare | High | Full Compatibility |
| Vacuum Pump Seal Kit VP-SK | Used By: 1 Assets - Vacuum Pump | 1 Assets | 0 Kits | Single-Asset Spare | Validated | Full Compatibility |
| Vacuum Pump Filter Element VP-FE | Used By: 1 Assets - Vacuum Pump | 1 Assets | 1 EA | Single-Asset Spare | High | Full Compatibility |
Simple commonality indicators for standardization awareness, without adding engineering change or maintenance workflows.
Spares used by several assets.
Spares that support only one visible asset.
Single-asset or low-confidence compatibility records.
Every compatibility row states whether the spare is an exact match, substitute, emergency substitute, or obsolete item.
| Spare Item | Compatible Equipment | Compatible Asset Group | Match Type | Confidence | Readiness Contribution | Available Stock | Restrictions | Notes |
|---|---|---|---|---|---|---|---|---|
| Bearing Set 6205 | Extractor A | Rotating assets | Exact Match | Validated | Full Compatibility | 2 Sets | Use only on 6205 bearing positions confirmed on the asset plate. | Shared bearing stock protects extractor, vacuum pump, and feed pump assets. |
| Mechanical Seal Kit MS-40 | Extractor A | Extractor and transfer pump seal positions | Exact Match | Validated | Full Compatibility | 1 Kits | Use on MS-40 seal faces only; do not substitute for vacuum pump seals. | Rejected spare evidence exists but is excluded from released available stock. |
| Service Gasket Kit | Extractor A | Extractor service gasket positions | Exact Match | High | Full Compatibility | 0 Kits | Confirm gasket material before solvent-contact use. | Rejected stock is visible but does not improve readiness. |
| Filter Bag FB-100 | Extractor A | Extractor filter baskets | Exact Match | Validated | Full Compatibility | 18 EA | Confirm process-contact documentation before release. | Production consumable, not a maintenance critical spare. |
| Bearing Set 6205 | Extractor B | Rotating assets | Exact Match | Validated | Full Compatibility | 2 Sets | Use only on 6205 bearing positions confirmed on the asset plate. | Shared bearing stock protects extractor, vacuum pump, and feed pump assets. |
| Mechanical Seal Kit MS-40 | Extractor B | Extractor and transfer pump seal positions | Exact Match | Validated | Full Compatibility | 1 Kits | Use on MS-40 seal faces only; do not substitute for vacuum pump seals. | Rejected spare evidence exists but is excluded from released available stock. |
| Service Gasket Kit | Extractor B | Extractor service gasket positions | Exact Match | High | Full Compatibility | 0 Kits | Confirm gasket material before solvent-contact use. | Rejected stock is visible but does not improve readiness. |
| Filter Bag FB-100 | Extractor B | Extractor filter baskets | Exact Match | Validated | Full Compatibility | 18 EA | Confirm process-contact documentation before release. | Production consumable, not a maintenance critical spare. |
| Compressor Service Kit CSK-01 | Chiller 01 | Chiller compressor service kits | Exact Match | Validated | Full Compatibility | 1 Kits | Use only on CSK-01 chiller compressor assemblies. | One released kit protects two high-criticality chillers. |
| Refrigerant Filter RF-20 | Chiller 01 | Chiller refrigerant circuits | Exact Match | High | Full Compatibility | 4 EA | Confirm refrigerant compatibility before use. | May reduce risk for chiller filter events but is not a compressor-kit substitute. |
| O-Ring Set OR-18 | Chiller 01 | General service O-ring positions | Emergency Substitute | Medium | Mitigated Risk Only | 5 Kits | Emergency use only where material, size, and product-contact restrictions are checked. | Substitute evidence reduces risk visibility but does not equal approved service gasket coverage. |
| Compressor Service Kit CSK-01 | Chiller 02 | Chiller compressor service kits | Exact Match | Validated | Full Compatibility | 1 Kits | Use only on CSK-01 chiller compressor assemblies. | One released kit protects two high-criticality chillers. |
| Refrigerant Filter RF-20 | Chiller 02 | Chiller refrigerant circuits | Exact Match | High | Full Compatibility | 4 EA | Confirm refrigerant compatibility before use. | May reduce risk for chiller filter events but is not a compressor-kit substitute. |
| O-Ring Set OR-18 | Chiller 02 | General service O-ring positions | Emergency Substitute | Medium | Mitigated Risk Only | 5 Kits | Emergency use only where material, size, and product-contact restrictions are checked. | Substitute evidence reduces risk visibility but does not equal approved service gasket coverage. |
| Generator Service Kit GSK-100 | Generator | Generator service kits | Exact Match | Validated | Full Compatibility | 2 Kits | Use for GSK-100 compatible generator services only. | Emergency buffer commitment reduces free released stock. |
| Control Module CM-12 | Generator | Generator control modules | Exact Match | Validated | Full Compatibility | 0 EA | Firmware and panel revision must match before use. | Hold stock is visible but cannot improve readiness. |
| Air Intake Filter AF-10 | Generator | Air compressor and generator intake filters | Exact Match | High | Full Compatibility | 4 EA | Use only when dimensions and airflow rating match. | Released stock supports compressor and generator filter readiness. |
| Vacuum Pump Seal Kit VP-SK | Vacuum Pump | Vacuum pump seal assemblies | Exact Match | Validated | Full Compatibility | 0 Kits | No approved substitute for vacuum seal service. | Physical stock exists in quarantine but released available stock remains zero. |
| Vacuum Pump Filter Element VP-FE | Vacuum Pump | Vacuum pump filter elements | Exact Match | High | Full Compatibility | 1 EA | Confirm filter micron rating before use. | Below reorder point creates short-horizon readiness risk. |
| Bearing Set 6205 | Vacuum Pump | Rotating assets | Exact Match | Validated | Full Compatibility | 2 Sets | Use only on 6205 bearing positions confirmed on the asset plate. | Shared bearing stock protects extractor, vacuum pump, and feed pump assets. |
| Mechanical Seal Kit MS-40 | Feed Pump | Extractor and transfer pump seal positions | Exact Match | Validated | Full Compatibility | 1 Kits | Use on MS-40 seal faces only; do not substitute for vacuum pump seals. | Rejected spare evidence exists but is excluded from released available stock. |
| Bearing Set 6205 | Feed Pump | Rotating assets | Exact Match | Validated | Full Compatibility | 2 Sets | Use only on 6205 bearing positions confirmed on the asset plate. | Shared bearing stock protects extractor, vacuum pump, and feed pump assets. |
| Service Gasket Kit | Feed Pump | Extractor service gasket positions | Exact Match | High | Full Compatibility | 0 Kits | Confirm gasket material before solvent-contact use. | Rejected stock is visible but does not improve readiness. |
| Air Intake Filter AF-10 | Air Compressor | Air compressor and generator intake filters | Exact Match | High | Full Compatibility | 4 EA | Use only when dimensions and airflow rating match. | Released stock supports compressor and generator filter readiness. |
| O-Ring Set OR-18 | Air Compressor | General service O-ring positions | Emergency Substitute | Medium | Mitigated Risk Only | 5 Kits | Emergency use only where material, size, and product-contact restrictions are checked. | Substitute evidence reduces risk visibility but does not equal approved service gasket coverage. |
Substitute stock may reduce risk, but it does not show full readiness unless explicitly approved as equivalent.
| Substitute Item | Replaces Item | Compatible Equipment | Substitution Type | Confidence | Limitation | Approval Placeholder | Readiness Effect |
|---|---|---|---|---|---|---|---|
| O-Ring Set OR-18 | Service Gasket Kit | Extractor A, Extractor B, Feed Pump | Emergency Substitute | Medium | Emergency use only for non-product-contact covers after size and material check. | Approval Placeholder - QA/Engineering equivalence not implemented. | May reduce operational risk but does not make Service Gasket Kit fully ready. |
| Refrigerant Filter RF-20 | Vacuum Pump Filter Element VP-FE | Vacuum Pump | Substitute | Low | Only dimensional fit is known; micron rating and media compatibility need review. | Approval Placeholder - not an approved equivalent. | Does not satisfy full readiness until explicitly approved as equivalent. |
| Air Intake Filter AF-10 | Generator service air filter | Generator | Substitute | High | Use only when airflow rating and housing dimensions match the generator intake. | Approval Placeholder - maintenance review required before use. | Can reduce risk for intake-filter events; cannot substitute for the generator service kit. |
Depot can show substitute evidence and compatibility notes, but it does not create engineering change, quality-system, or work-order workflows.
